Free tool · IPv6 check

What is my IPv6 address?

Your public IPv6 address

Over this connection you reached us with IPv4 (216.73.217.62). Your IPv6 address is not visible on this connection.

Details for your IPv4 address 

IPv6 on this connection

Based on how your browser reached this page.

CheckResultDetails
IPv4 connectivity Works 216.73.217.62
IPv6 connectivity Not confirmed This visit used IPv4.

You reached this page over IPv4. That doesn't prove you lack IPv6, but if you had working IPv6 your browser would normally use it.

The basics

How to read an IPv6 address

An IPv6 address is 128 bits, written as eight groups of four hexadecimal digits separated by colons. Leading zeros in a group can be dropped, and one run of all-zero groups can be replaced by ::, so 2001:0db8:0000:0000:0000:0000:0000:0010 and 2001:db8::10 are the same address.

The first 64 bits are normally the network prefix, assigned by your provider to your home or phone connection. The last 64 bits are the interface identifier, chosen by your device. Automatic address setup relies on that split, so each local network, such as your home Wi-Fi, gets a whole /64 to itself: far more addresses than it will ever use.

A public address starts with 2 or 3 (the 2000::/3 block). Addresses starting with fe80: are link-local and only work on your own network segment; fd addresses are private, like 192.168.x.x in IPv4. Neither is ever shown to websites.

Dual-stack: how your browser picks a version

Most networks that have IPv6 also keep IPv4, which is called dual-stack. When a site has addresses of both kinds, your browser tries IPv6 first and, if there is no answer within a fraction of a second (around 250 ms is typical), starts an IPv4 attempt in parallel and uses whichever connects first. The method is known as Happy Eyeballs (RFC 8305).

So on a healthy dual-stack connection you will almost always reach sites like this one over IPv6. If you have IPv6 but still arrive over IPv4, the IPv6 path is usually slow or partly broken, or your system has been told to prefer IPv4 (some older tunnelling methods, such as 6to4 and Teredo, are deliberately ranked below IPv4).

Privacy addresses

Because the second half of an IPv6 address belongs to one device, early systems built it from the network card's hardware (MAC) address. That made a laptop recognisable wherever it went. Modern operating systems avoid this: for outgoing connections they generate temporary addresses with a random interface identifier and replace them every day or so (RFC 8981). If this page shows an IPv6 address, it is probably one of those, and it may be different tomorrow.

The prefix still identifies your connection, just as an IPv4 address does, and random device addresses do not change that. On many home lines the prefix stays the same for months, while a dynamic or shared IPv4 address may change more often or be used by many customers at once. So the prefix alone can point to your household as well as, or better than, your IPv4 address.

IPv4 vs IPv6

IPv4IPv6
Length32 bits128 bits
Written asFour decimal numbers, dotsEight hex groups, colons; :: shortens zeros
Example198.51.100.72001:db8:4a12::7
Typical home allocationOne address, shared by every deviceA /64 or larger: a public address per device
Private ranges10/8, 172.16/12, 192.168/16fc00::/7
Address sharing by the ISPCommon (CGNAT)Not needed
Device-chosen addressesNo, assigned by the router (DHCP)Yes, including temporary privacy addresses

For developers

Get your IP programmatically

The same data as one JSON request: call /self to look up the address a request comes from, or pass any IP or domain. A free key includes 1.000 requests a day.

GET cURL
curl "https://ipapi.gr/api/lookup/self?key=YOUR_API_KEY"

FAQ

Questions about IPv6 addresses

What is the difference between IPv4 and IPv6?

IPv6 uses 128-bit addresses instead of 32-bit ones, so there is no shortage and no need for several customers to share one address. It is written in hexadecimal, for example 2001:db8:4a12:8f00::1c, with runs of zeros shortened to ::. For browsing there is no visible difference: the same sites, the same speed in most cases.

Why don't I have an IPv6 address?

The most common reasons are that your internet provider has not switched it on for your line, your router has IPv6 turned off, or a VPN is blocking IPv6 so that it cannot bypass the tunnel. Office and school networks often leave it off as well. A quick way to tell whether it is your home network: open this page on your phone over mobile data, since many mobile networks hand out IPv6 by default.

Why do I only see an IPv6 address?

A website sees only the address of the connection that was used. On a network with both versions, browsers prefer IPv6 when it works, so IPv6 is what this page received. You very likely have an IPv4 address as well; your device uses it for sites that are not on IPv6 yet.

Is IPv6 faster than IPv4?

Not by design. Sometimes it is slightly quicker, because traffic skips the address-sharing step that many providers apply to IPv4. The real problem is broken IPv6: if your device thinks it has IPv6 but the path does not work properly, the browser waits a moment before falling back to IPv4, and pages feel slow.

Does my IPv6 address reveal my device?

The first half of an IPv6 address (the /64 prefix) identifies your home or mobile network, much like an IPv4 address does. The second half identifies the device. Older systems built it from the network card's hardware address, which made a device trackable across networks. Current Windows, macOS, iOS, Android and most Linux systems use temporary random addresses for outgoing connections instead (privacy extensions, RFC 8981) and replace them regularly, often daily.

How do I enable IPv6?

First check that your provider offers it; nothing on your side can create IPv6 if the line does not have it. Then open your router's settings and look for an IPv6 or WAN IPv6 section: the usual setting is automatic, DHCPv6 or prefix delegation, as your provider recommends. Devices normally need no change. On Windows, make sure "Internet Protocol Version 6 (TCP/IPv6)" is ticked in the adapter properties; on a Mac, set "Configure IPv6" to Automatic in the network details.